The MC2 is a 2-function HO and N scale hard-wire decoder with a 7 pin JST socket. The MC2 is designed for use in locomotives where a T-series or M-Series decoder is too large. This decoder may be hard-wired, but is also available with 8-pin NMRA plugs installed. See the “Variants” page for more options.
- Back EMF Load Compensation:
Provides superior slow speed control and high performance under load.
- Quiet Drive:
Super-quiet motor control for “buzz” free motor performance.
- DC Mode:
Decoder will automatically detect DC power. You can also configure how your lighting effects function on DC.
- Variable Momentum:
Allows you to make custom acceleration and deceleration curves.
- Incandescent Bulb Support:
This decoder can be used with 12 Volt bulbs.
- Function Remapping:
Buttons 0 through 12 may be used to control the lighting functions of this decoder.
- Programmable Lighting Effects:
Choose from 20 separate user-programmable lighting effects!
- Dimmable Brightness:
Configure multiple different brightness levels for your LED’s or incandescent bulbs.
- Decoder Lock:
Feature which prevents accidental/unwanted programming while activated.
- Airwire™ Compatible:
Fully compatible with Airwire™ operation.
- User-Loadable Speed Tables:
Configure custom speed curves and set speed limits.
Interface Type: Hard-Wire
Direct-Plug (7-Pin JST)
Dimensions (L x W x H): 0.709″ x 0.419″ x 0.191″ or 18.02mm x 10.63mm x 4.85mm
Scale: HO Scale N Scale
Continuous/Peak: 1.0/2.0 Amp
Total Functions: 2
Function Rating: 100 mA
12V Outputs: 2
Decoder Literature: MC2.pdf
Comprehensive Guide: Comprehensive-Programming-Guide.pdf