The MC2 is a HO and N scale decoder with a 7 pin JST socket. The MC2 is designed for use in locomotives where a T1 or M1 are too large. Close in size to the FL2, this decoder also provides motor control.
The MC2P-SH decoder comes with an included ~1″ (~25mm) long harness which is terminated with a 8-Pin NMRA plug.
- Back EMF Load Compensation:
Provides superior slow speed control and high performance under load.
- Quiet Drive:
Super-quiet motor control for “buzz” free motor performance.
- DC Mode:
Decoder will automatically detect DC power. You can also configure how your lighting effects function on DC.
- Variable Momentum:
Allows you to make custom acceleration and deceleration curves.
- Incandescent Bulb Support:
This decoder can be used with 12 Volt bulbs.
- Function Remapping:
Buttons 0 through 12 may be used to control the lighting functions of this decoder.
- Programmable Lighting Effects:
Choose from 20 separate user-programmable lighting effects!
- Dimmable Brightness:
Configure multiple different brightness levels for your LED’s or incandescent bulbs.
- Decoder Lock:
Feature which prevents accidental/unwanted programming while activated.
- Airwire™ Compatible:
Fully compatible with Airwire™ operation.
- User-Loadable Speed Tables:
Configure custom speed curves and set speed limits.
Interface Type: Direct-Plug (8-Pin NMRA)
Dimensions (L x W x H): 0.709″ x 0.419″ x 0.191″ or 18.02mm x 10.63mm x 4.85mm
Scale: HO Scale N Scale
Continuous/Peak: 1.0/2.0 Amp
Total Functions: 2
Function Rating: 100 mA
12V Outputs: 2
Decoder Literature: MC2.pdf
Comprehensive Guide: Comprehensive-Programming-Guide.pdf