Train Control Systems T1P-SH multi-purpose decoder - HO Scale

$39.99 $38.99


The T1 is a multi-purpose HO-scale decoder. The T1P-SH decoder comes with an included ~1″ (~25mm) long harness which is terminated with a 8-Pin NMRA plug.

Note: The Green and Purple wires on this decoder are not used. The T1 is a 2-function decoder, but still uses the 9-pin JST which includes the Green and Purple wires.

  • Back EMF Load Compensation:

Provides superior slow speed control and high performance under load.

  • Quiet Drive:

Super-quiet motor control for “buzz” free motor performance.

  • DC Mode:

Decoder will automatically detect DC power. You can also configure how your lighting effects function on DC.

  • Variable Momentum:

Allows you to make custom acceleration and deceleration curves.

  • Incandescent Bulb Support:

This decoder can be used with 12 Volt bulbs.

  • Function Remapping:

Buttons 0 through 12 may be used to control the lighting functions of this decoder.

  • Programmable Lighting Effects:

Choose from 20 separate user-programmable lighting effects!

  • Dimmable Brightness:

Configure multiple different brightness levels for your LED’s or incandescent bulbs.

  • Decoder Lock:

Feature which prevents accidental/unwanted programming while activated.

  • Airwire™ Compatible:

Fully compatible with Airwire™ operation.

  • User-Loadable Speed Tables:

Configure custom speed curves and set speed limits.


Interface Type: Direct-Plug (8-Pin NMRA)
Dimensions (L x W x H): 0.969″ x 0.661″ x 0.193″ or 24.61mm x 16.79mm x 4.9mm
Scale: HO Scale
Continuous/Peak: 1.3/2.0 Amp
Total Functions: 2
Function Rating: 100 mA
12V Outputs: 2
Decoder Literature:  T1.pdf