The T6X is a multi-purpose HO-scale decoder. This decoder may be hard-wired or plugged directly into any locomotive with a 9-pin JST plug. The T6X may be used in locomotives which have ditch lights in addition to forward and reverse headlights, as well as other lighting features such as rotary beacons, flashing lights, step lights, etc. Function 5 and function 6 are included via the additional Brown and Pink wires.
- Back EMF Load Compensation:
Provides superior slow speed control and high performance under load.
- Quiet Drive:
Super-quiet motor control for “buzz” free motor performance.
- DC Mode:
Decoder will automatically detect DC power. You can also configure how your lighting effects function on DC.
This feature allows the decoder to talk to the command station. RailCom supports expansion for new features.
- Variable Momentum:
Allows you to make custom acceleration and deceleration curves.
- Incandescent Bulb Support:
This decoder can be used with 12 Volt bulbs.
- Function Remapping:
Buttons 0 through 12 may be used to control the lighting functions of this decoder.
- Programmable Lighting Effects:
Choose from 20 separate user-programmable lighting effects!
- Dimmable Brightness:
Configure multiple different brightness levels for your LED’s or incandescent bulbs.
- Decoder Lock:
Feature which prevents accidental/unwanted programming while activated.
- Airwire™ Compatible:
Fully compatible with Airwire™ operation.
- User-Loadable Speed Tables:
Configure custom speed curves and set speed limits.
Interface Type: Hard-Wire
Direct-Plug (9-Pin JST)
Dimensions (L x W x H): 0.969″ x 0.661″ x 0.193″ or 24.61mm x 16.79mm x 4.9mm
Scale: HO Scale
Continuous/Peak: 1.3/2.0 Amp
Total Functions: 6
Function Rating: 100 mA
12V Outputs: 6
Decoder Literature: T6X.pdf
Comprehensive Guide: Comprehensive-Programming-Guide.pdf